#ifndef ISTEAMNETWORKINGSOCKETS010
#define ISTEAMNETWORKINGSOCKETS010

// this interface version is not found in public SDK archives, it is based on reversing the returned vftable from steamclient64.dll

class ISteamNetworkingSockets010
{
public:

	/// Creates a "server" socket that listens for clients to connect to by 
	/// calling ConnectByIPAddress, over ordinary UDP (IPv4 or IPv6)
	///
	/// You must select a specific local port to listen on and set it
	/// the port field of the local address.
	///
	/// Usually you will set the IP portion of the address to zero (SteamNetworkingIPAddr::Clear()).
	/// This means that you will not bind to any particular local interface (i.e. the same
	/// as INADDR_ANY in plain socket code).  Furthermore, if possible the socket will be bound
	/// in "dual stack" mode, which means that it can accept both IPv4 and IPv6 client connections.
	/// If you really do wish to bind a particular interface, then set the local address to the
	/// appropriate IPv4 or IPv6 IP.
	///
	/// If you need to set any initial config options, pass them here.  See
	/// SteamNetworkingConfigValue_t for more about why this is preferable to
	/// setting the options "immediately" after creation.
	///
	/// When a client attempts to connect, a SteamNetConnectionStatusChangedCallback_t
	/// will be posted.  The connection will be in the connecting state.
	virtual HSteamListenSocket CreateListenSocketIP( const SteamNetworkingIPAddr &localAddress, int nOptions, const SteamNetworkingConfigValue_t *pOptions ) = 0;

	/// Creates a connection and begins talking to a "server" over UDP at the
	/// given IPv4 or IPv6 address.  The remote host must be listening with a
	/// matching call to CreateListenSocketIP on the specified port.
	///
	/// A SteamNetConnectionStatusChangedCallback_t callback will be triggered when we start
	/// connecting, and then another one on either timeout or successful connection.
	///
	/// If the server does not have any identity configured, then their network address
	/// will be the only identity in use.  Or, the network host may provide a platform-specific
	/// identity with or without a valid certificate to authenticate that identity.  (These
	/// details will be contained in the SteamNetConnectionStatusChangedCallback_t.)  It's
	/// up to your application to decide whether to allow the connection.
	///
	/// By default, all connections will get basic encryption sufficient to prevent
	/// casual eavesdropping.  But note that without certificates (or a shared secret
	/// distributed through some other out-of-band mechanism), you don't have any
	/// way of knowing who is actually on the other end, and thus are vulnerable to
	/// man-in-the-middle attacks.
	///
	/// If you need to set any initial config options, pass them here.  See
	/// SteamNetworkingConfigValue_t for more about why this is preferable to
	/// setting the options "immediately" after creation.
	virtual HSteamNetConnection ConnectByIPAddress( const SteamNetworkingIPAddr &address, int nOptions, const SteamNetworkingConfigValue_t *pOptions ) = 0;

	/// Like CreateListenSocketIP, but clients will connect using ConnectP2P.
	///
	/// nLocalVirtualPort specifies how clients can connect to this socket using
	/// ConnectP2P.  It's very common for applications to only have one listening socket;
	/// in that case, use zero.  If you need to open multiple listen sockets and have clients
	/// be able to connect to one or the other, then nLocalVirtualPort should be a small
	/// integer (<1000) unique to each listen socket you create.
	///
	/// If you use this, you probably want to call ISteamNetworkingUtils::InitRelayNetworkAccess()
	/// when your app initializes.
	///
	/// If you are listening on a dedicated servers in known data center,
	/// then you can listen using this function instead of CreateHostedDedicatedServerListenSocket,
	/// to allow clients to connect without a ticket.  Any user that owns
	/// the app and is signed into Steam will be able to attempt to connect to
	/// your server.  Also, a connection attempt may require the client to
	/// be connected to Steam, which is one more moving part that may fail.  When
	/// tickets are used, then once a ticket is obtained, a client can connect to
	/// your server even if they got disconnected from Steam or Steam is offline.
	///
	/// If you need to set any initial config options, pass them here.  See
	/// SteamNetworkingConfigValue_t for more about why this is preferable to
	/// setting the options "immediately" after creation.
	virtual HSteamListenSocket CreateListenSocketP2P( int nLocalVirtualPort, int nOptions, const SteamNetworkingConfigValue_t *pOptions ) = 0;

	/// Begin connecting to a peer that is identified using a platform-specific identifier.
	/// This uses the default rendezvous service, which depends on the platform and library
	/// configuration.  (E.g. on Steam, it goes through the steam backend.)
	///
	/// If you need to set any initial config options, pass them here.  See
	/// SteamNetworkingConfigValue_t for more about why this is preferable to
	/// setting the options "immediately" after creation.
	///
	/// To use your own signaling service, see:
	/// - ConnectP2PCustomSignaling
	/// - k_ESteamNetworkingConfig_Callback_CreateConnectionSignaling
	virtual HSteamNetConnection ConnectP2P( const SteamNetworkingIdentity &identityRemote, int nRemoteVirtualPort, int nOptions, const SteamNetworkingConfigValue_t *pOptions ) = 0;

	/// Accept an incoming connection that has been received on a listen socket.
	///
	/// When a connection attempt is received (perhaps after a few basic handshake
	/// packets have been exchanged to prevent trivial spoofing), a connection interface
	/// object is created in the k_ESteamNetworkingConnectionState_Connecting state
	/// and a SteamNetConnectionStatusChangedCallback_t is posted.  At this point, your
	/// application MUST either accept or close the connection.  (It may not ignore it.)
	/// Accepting the connection will transition it either into the connected state,
	/// or the finding route state, depending on the connection type.
	///
	/// You should take action within a second or two, because accepting the connection is
	/// what actually sends the reply notifying the client that they are connected.  If you
	/// delay taking action, from the client's perspective it is the same as the network
	/// being unresponsive, and the client may timeout the connection attempt.  In other
	/// words, the client cannot distinguish between a delay caused by network problems
	/// and a delay caused by the application.
	///
	/// This means that if your application goes for more than a few seconds without
	/// processing callbacks (for example, while loading a map), then there is a chance
	/// that a client may attempt to connect in that interval and fail due to timeout.
	///
	/// If the application does not respond to the connection attempt in a timely manner,
	/// and we stop receiving communication from the client, the connection attempt will
	/// be timed out locally, transitioning the connection to the
	/// k_ESteamNetworkingConnectionState_ProblemDetectedLocally state.  The client may also
	/// close the connection before it is accepted, and a transition to the
	/// k_ESteamNetworkingConnectionState_ClosedByPeer is also possible depending the exact
	/// sequence of events.
	///
	/// Returns k_EResultInvalidParam if the handle is invalid.
	/// Returns k_EResultInvalidState if the connection is not in the appropriate state.
	/// (Remember that the connection state could change in between the time that the
	/// notification being posted to the queue and when it is received by the application.)
	///
	/// A note about connection configuration options.  If you need to set any configuration
	/// options that are common to all connections accepted through a particular listen
	/// socket, consider setting the options on the listen socket, since such options are
	/// inherited automatically.  If you really do need to set options that are connection
	/// specific, it is safe to set them on the connection before accepting the connection.
	virtual EResult AcceptConnection( HSteamNetConnection hConn ) = 0;

	/// Disconnects from the remote host and invalidates the connection handle.
	/// Any unread data on the connection is discarded.
	///
	/// nReason is an application defined code that will be received on the other
	/// end and recorded (when possible) in backend analytics.  The value should
	/// come from a restricted range.  (See ESteamNetConnectionEnd.)  If you don't need
	/// to communicate any information to the remote host, and do not want analytics to
	/// be able to distinguish "normal" connection terminations from "exceptional" ones,
	/// You may pass zero, in which case the generic value of
	/// k_ESteamNetConnectionEnd_App_Generic will be used.
	///
	/// pszDebug is an optional human-readable diagnostic string that will be received
	/// by the remote host and recorded (when possible) in backend analytics.
	///
	/// If you wish to put the socket into a "linger" state, where an attempt is made to
	/// flush any remaining sent data, use bEnableLinger=true.  Otherwise reliable data
	/// is not flushed.
	///
	/// If the connection has already ended and you are just freeing up the
	/// connection interface, the reason code, debug string, and linger flag are
	/// ignored.
	virtual bool CloseConnection( HSteamNetConnection hPeer, int nReason, const char *pszDebug, bool bEnableLinger ) = 0;

	/// Destroy a listen socket.  All the connections that were accepting on the listen
	/// socket are closed ungracefully.
	virtual bool CloseListenSocket( HSteamListenSocket hSocket ) = 0;

	/// Set connection user data.  the data is returned in the following places
	/// - You can query it using GetConnectionUserData.
	/// - The SteamNetworkingmessage_t structure.
	/// - The SteamNetConnectionInfo_t structure.
	///   (Which is a member of SteamNetConnectionStatusChangedCallback_t -- but see WARNINGS below!!!!)
	///
	/// Do you need to set this atomically when the connection is created?
	/// See k_ESteamNetworkingConfig_ConnectionUserData.
	///
	/// WARNING: Be *very careful* when using the value provided in callbacks structs.
	/// Callbacks are queued, and the value that you will receive in your
	/// callback is the userdata that was effective at the time the callback
	/// was queued.  There are subtle race conditions that can happen if you
	/// don't understand this!
	///
	/// If any incoming messages for this connection are queued, the userdata
	/// field is updated, so that when when you receive messages (e.g. with
	/// ReceiveMessagesOnConnection), they will always have the very latest
	/// userdata.  So the tricky race conditions that can happen with callbacks
	/// do not apply to retrieving messages.
	///
	/// Returns false if the handle is invalid.
	virtual bool SetConnectionUserData( HSteamNetConnection hPeer, int64 nUserData ) = 0;

	/// Fetch connection user data.  Returns -1 if handle is invalid
	/// or if you haven't set any userdata on the connection.
	virtual int64 GetConnectionUserData( HSteamNetConnection hPeer ) = 0;

	/// Set a name for the connection, used mostly for debugging
	virtual void SetConnectionName( HSteamNetConnection hPeer, const char *pszName ) = 0;

	/// Fetch connection name.  Returns false if handle is invalid
	virtual bool GetConnectionName( HSteamNetConnection hPeer, char *pszName, int nMaxLen ) = 0;

	/// Send a message to the remote host on the specified connection.
	///
	/// nSendFlags determines the delivery guarantees that will be provided,
	/// when data should be buffered, etc.  E.g. k_nSteamNetworkingSend_Unreliable
	///
	/// Note that the semantics we use for messages are not precisely
	/// the same as the semantics of a standard "stream" socket.
	/// (SOCK_STREAM)  For an ordinary stream socket, the boundaries
	/// between chunks are not considered relevant, and the sizes of
	/// the chunks of data written will not necessarily match up to
	/// the sizes of the chunks that are returned by the reads on
	/// the other end.  The remote host might read a partial chunk,
	/// or chunks might be coalesced.  For the message semantics 
	/// used here, however, the sizes WILL match.  Each send call 
	/// will match a successful read call on the remote host 
	/// one-for-one.  If you are porting existing stream-oriented 
	/// code to the semantics of reliable messages, your code should 
	/// work the same, since reliable message semantics are more 
	/// strict than stream semantics.  The only caveat is related to 
	/// performance: there is per-message overhead to retain the 
	/// message sizes, and so if your code sends many small chunks 
	/// of data, performance will suffer. Any code based on stream 
	/// sockets that does not write excessively small chunks will 
	/// work without any changes. 
	///
	/// The pOutMessageNumber is an optional pointer to receive the
	/// message number assigned to the message, if sending was successful.
	///
	/// Returns:
	/// - k_EResultInvalidParam: invalid connection handle, or the individual message is too big.
	///   (See k_cbMaxSteamNetworkingSocketsMessageSizeSend)
	/// - k_EResultInvalidState: connection is in an invalid state
	/// - k_EResultNoConnection: connection has ended
	/// - k_EResultIgnored: You used k_nSteamNetworkingSend_NoDelay, and the message was dropped because
	///   we were not ready to send it.
	/// - k_EResultLimitExceeded: there was already too much data queued to be sent.
	///   (See k_ESteamNetworkingConfig_SendBufferSize)
	virtual EResult SendMessageToConnection( HSteamNetConnection hConn, const void *pData, uint32 cbData, int nSendFlags, int64 *pOutMessageNumber ) = 0;

	/// Send one or more messages without copying the message payload.
	/// This is the most efficient way to send messages. To use this
	/// function, you must first allocate a message object using
	/// ISteamNetworkingUtils::AllocateMessage.  (Do not declare one
	/// on the stack or allocate your own.)
	///
	/// You should fill in the message payload.  You can either let
	/// it allocate the buffer for you and then fill in the payload,
	/// or if you already have a buffer allocated, you can just point
	/// m_pData at your buffer and set the callback to the appropriate function
	/// to free it.  Note that if you use your own buffer, it MUST remain valid
	/// until the callback is executed.  And also note that your callback can be
	/// invoked at any time from any thread (perhaps even before SendMessages
	/// returns!), so it MUST be fast and threadsafe.
	///
	/// You MUST also fill in:
	/// - m_conn - the handle of the connection to send the message to
	/// - m_nFlags - bitmask of k_nSteamNetworkingSend_xxx flags.
	///
	/// All other fields are currently reserved and should not be modified.
	///
	/// The library will take ownership of the message structures.  They may
	/// be modified or become invalid at any time, so you must not read them
	/// after passing them to this function.
	///
	/// pOutMessageNumberOrResult is an optional array that will receive,
	/// for each message, the message number that was assigned to the message
	/// if sending was successful.  If sending failed, then a negative EResult
	/// value is placed into the array.  For example, the array will hold
	/// -k_EResultInvalidState if the connection was in an invalid state.
	/// See ISteamNetworkingSockets::SendMessageToConnection for possible
	/// failure codes.
	virtual void SendMessages( int nMessages, SteamNetworkingMessage_t *const *pMessages, int64 *pOutMessageNumberOrResult ) = 0;

	/// Flush any messages waiting on the Nagle timer and send them
	/// at the next transmission opportunity (often that means right now).
	///
	/// If Nagle is enabled (it's on by default) then when calling 
	/// SendMessageToConnection the message will be buffered, up to the Nagle time
	/// before being sent, to merge small messages into the same packet.
	/// (See k_ESteamNetworkingConfig_NagleTime)
	///
	/// Returns:
	/// k_EResultInvalidParam: invalid connection handle
	/// k_EResultInvalidState: connection is in an invalid state
	/// k_EResultNoConnection: connection has ended
	/// k_EResultIgnored: We weren't (yet) connected, so this operation has no effect.
	virtual EResult FlushMessagesOnConnection( HSteamNetConnection hConn ) = 0;

	/// Fetch the next available message(s) from the connection, if any.
	/// Returns the number of messages returned into your array, up to nMaxMessages.
	/// If the connection handle is invalid, -1 is returned.
	///
	/// The order of the messages returned in the array is relevant.
	/// Reliable messages will be received in the order they were sent (and with the
	/// same sizes --- see SendMessageToConnection for on this subtle difference from a stream socket).
	///
	/// Unreliable messages may be dropped, or delivered out of order with respect to
	/// each other or with respect to reliable messages.  The same unreliable message
	/// may be received multiple times.
	///
	/// If any messages are returned, you MUST call SteamNetworkingMessage_t::Release() on each
	/// of them free up resources after you are done.  It is safe to keep the object alive for
	/// a little while (put it into some queue, etc), and you may call Release() from any thread.
	virtual int ReceiveMessagesOnConnection( HSteamNetConnection hConn, SteamNetworkingMessage_t **ppOutMessages, int nMaxMessages ) = 0; 

	/// Returns basic information about the high-level state of the connection.
	virtual bool GetConnectionInfo( HSteamNetConnection hConn, SteamNetConnectionInfo_t *pInfo ) = 0;

	/// Returns a small set of information about the real-time state of the connection
	/// Returns false if the connection handle is invalid, or the connection has ended.
	virtual bool GetQuickConnectionStatus( HSteamNetConnection hConn, SteamNetworkingQuickConnectionStatus *pStats ) = 0;

	/// Returns detailed connection stats in text format.  Useful
	/// for dumping to a log, etc.
	///
	/// Returns:
	/// -1 failure (bad connection handle)
	/// 0 OK, your buffer was filled in and '\0'-terminated
	/// >0 Your buffer was either nullptr, or it was too small and the text got truncated.
	///    Try again with a buffer of at least N bytes.
	virtual int GetDetailedConnectionStatus( HSteamNetConnection hConn, char *pszBuf, int cbBuf ) = 0;

	/// Returns local IP and port that a listen socket created using CreateListenSocketIP is bound to.
	///
	/// An IPv6 address of ::0 means "any IPv4 or IPv6"
	/// An IPv6 address of ::ffff:0000:0000 means "any IPv4"
	virtual bool GetListenSocketAddress( HSteamListenSocket hSocket, SteamNetworkingIPAddr *address ) = 0;

	/// Create a pair of connections that are talking to each other, e.g. a loopback connection.
	/// This is very useful for testing, or so that your client/server code can work the same
	/// even when you are running a local "server".
	///
	/// The two connections will immediately be placed into the connected state, and no callbacks
	/// will be posted immediately.  After this, if you close either connection, the other connection
	/// will receive a callback, exactly as if they were communicating over the network.  You must
	/// close *both* sides in order to fully clean up the resources!
	///
	/// By default, internal buffers are used, completely bypassing the network, the chopping up of
	/// messages into packets, encryption, copying the payload, etc.  This means that loopback
	/// packets, by default, will not simulate lag or loss.  Passing true for bUseNetworkLoopback will
	/// cause the socket pair to send packets through the local network loopback device (127.0.0.1)
	/// on ephemeral ports.  Fake lag and loss are supported in this case, and CPU time is expended
	/// to encrypt and decrypt.
	///
	/// If you wish to assign a specific identity to either connection, you may pass a particular
	/// identity.  Otherwise, if you pass nullptr, the respective connection will assume a generic
	/// "localhost" identity.  If you use real network loopback, this might be translated to the
	/// actual bound loopback port.  Otherwise, the port will be zero.
	virtual bool CreateSocketPair( HSteamNetConnection *pOutConnection1, HSteamNetConnection *pOutConnection2, bool bUseNetworkLoopback, const SteamNetworkingIdentity *pIdentity1, const SteamNetworkingIdentity *pIdentity2 ) = 0;

	//
	// Identity and authentication
	//

	/// Get the identity assigned to this interface.
	/// E.g. on Steam, this is the user's SteamID, or for the gameserver interface, the SteamID assigned
	/// to the gameserver.  Returns false and sets the result to an invalid identity if we don't know
	/// our identity yet.  (E.g. GameServer has not logged in.  On Steam, the user will know their SteamID
	/// even if they are not signed into Steam.)
	virtual bool GetIdentity( SteamNetworkingIdentity *pIdentity ) = 0;

	/// Indicate our desire to be ready participate in authenticated communications.
	/// If we are currently not ready, then steps will be taken to obtain the necessary
	/// certificates.   (This includes a certificate for us, as well as any CA certificates
	/// needed to authenticate peers.)
	///
	/// You can call this at program init time if you know that you are going to
	/// be making authenticated connections, so that we will be ready immediately when
	/// those connections are attempted.  (Note that essentially all connections require
	/// authentication, with the exception of ordinary UDP connections with authentication
	/// disabled using k_ESteamNetworkingConfig_IP_AllowWithoutAuth.)  If you don't call
	/// this function, we will wait until a feature is utilized that that necessitates
	/// these resources.
	///
	/// You can also call this function to force a retry, if failure has occurred.
	/// Once we make an attempt and fail, we will not automatically retry.
	/// In this respect, the behavior of the system after trying and failing is the same
	/// as before the first attempt: attempting authenticated communication or calling
	/// this function will call the system to attempt to acquire the necessary resources.
	///
	/// You can use GetAuthenticationStatus or listen for SteamNetAuthenticationStatus_t
	/// to monitor the status.
	///
	/// Returns the current value that would be returned from GetAuthenticationStatus.
	virtual ESteamNetworkingAvailability InitAuthentication() = 0;

	/// Query our readiness to participate in authenticated communications.  A
	/// SteamNetAuthenticationStatus_t callback is posted any time this status changes,
	/// but you can use this function to query it at any time.
	///
	/// The value of SteamNetAuthenticationStatus_t::m_eAvail is returned.  If you only
	/// want this high level status, you can pass NULL for pDetails.  If you want further
	/// details, pass non-NULL to receive them.
	virtual ESteamNetworkingAvailability GetAuthenticationStatus( SteamNetAuthenticationStatus_t *pDetails ) = 0;

	//
	// Poll groups.  A poll group is a set of connections that can be polled efficiently.
	// (In our API, to "poll" a connection means to retrieve all pending messages.  We
	// actually don't have an API to "poll" the connection *state*, like BSD sockets.)
	//

	/// Create a new poll group.
	///
	/// You should destroy the poll group when you are done using DestroyPollGroup
	virtual HSteamNetPollGroup CreatePollGroup() = 0;

	/// Destroy a poll group created with CreatePollGroup().
	///
	/// If there are any connections in the poll group, they are removed from the group,
	/// and left in a state where they are not part of any poll group.
	/// Returns false if passed an invalid poll group handle.
	virtual bool DestroyPollGroup( HSteamNetPollGroup hPollGroup ) = 0;

	/// Assign a connection to a poll group.  Note that a connection may only belong to a
	/// single poll group.  Adding a connection to a poll group implicitly removes it from
	/// any other poll group it is in.
	///
	/// You can pass k_HSteamNetPollGroup_Invalid to remove a connection from its current
	/// poll group without adding it to a new poll group.
	///
	/// If there are received messages currently pending on the connection, an attempt
	/// is made to add them to the queue of messages for the poll group in approximately
	/// the order that would have applied if the connection was already part of the poll
	/// group at the time that the messages were received.
	///
	/// Returns false if the connection handle is invalid, or if the poll group handle
	/// is invalid (and not k_HSteamNetPollGroup_Invalid).
	virtual bool SetConnectionPollGroup( HSteamNetConnection hConn, HSteamNetPollGroup hPollGroup ) = 0;

	/// Same as ReceiveMessagesOnConnection, but will return the next messages available
	/// on any connection in the poll group.  Examine SteamNetworkingMessage_t::m_conn
	/// to know which connection.  (SteamNetworkingMessage_t::m_nConnUserData might also
	/// be useful.)
	///
	/// Delivery order of messages among different connections will usually match the
	/// order that the last packet was received which completed the message.  But this
	/// is not a strong guarantee, especially for packets received right as a connection
	/// is being assigned to poll group.
	///
	/// Delivery order of messages on the same connection is well defined and the
	/// same guarantees are present as mentioned in ReceiveMessagesOnConnection.
	/// (But the messages are not grouped by connection, so they will not necessarily
	/// appear consecutively in the list; they may be interleaved with messages for
	/// other connections.)
	virtual int ReceiveMessagesOnPollGroup( HSteamNetPollGroup hPollGroup, SteamNetworkingMessage_t **ppOutMessages, int nMaxMessages ) = 0; 

	//
	// Clients connecting to dedicated servers hosted in a data center,
	// using tickets issued by your game coordinator.  If you are not
	// issuing your own tickets to restrict who can attempt to connect
	// to your server, then you won't use these functions.
	//

	/// Call this when you receive a ticket from your backend / matchmaking system.  Puts the
	/// ticket into a persistent cache, and optionally returns the parsed ticket.
	///
	/// See stamdatagram_ticketgen.h for more details.
	virtual bool ReceivedRelayAuthTicket( const void *pvTicket, int cbTicket, SteamDatagramRelayAuthTicket *pOutParsedTicket ) = 0;

	/// Search cache for a ticket to talk to the server on the specified virtual port.
	/// If found, returns the number of seconds until the ticket expires, and optionally
	/// the complete cracked ticket.  Returns 0 if we don't have a ticket.
	///
	/// Typically this is useful just to confirm that you have a ticket, before you
	/// call ConnectToHostedDedicatedServer to connect to the server.
	virtual int FindRelayAuthTicketForServer( const SteamNetworkingIdentity &identityGameServer, int nRemoteVirtualPort, SteamDatagramRelayAuthTicket *pOutParsedTicket ) = 0;

	/// Client call to connect to a server hosted in a Valve data center, on the specified virtual
	/// port.  You must have placed a ticket for this server into the cache, or else this connect
	/// attempt will fail!  If you are not issuing your own tickets, then to connect to a dedicated
	/// server via SDR in auto-ticket mode, use ConnectP2P.  (The server must be configured to allow
	/// this type of connection by listening using CreateListenSocketP2P.)
	///
	/// You may wonder why tickets are stored in a cache, instead of simply being passed as an argument
	/// here.  The reason is to make reconnection to a gameserver robust, even if the client computer loses
	/// connection to Steam or the central backend, or the app is restarted or crashes, etc.
	///
	/// If you use this, you probably want to call ISteamNetworkingUtils::InitRelayNetworkAccess()
	/// when your app initializes
	///
	/// If you need to set any initial config options, pass them here.  See
	/// SteamNetworkingConfigValue_t for more about why this is preferable to
	/// setting the options "immediately" after creation.
	virtual HSteamNetConnection ConnectToHostedDedicatedServer( const SteamNetworkingIdentity &identityTarget, int nRemoteVirtualPort, int nOptions, const SteamNetworkingConfigValue_t *pOptions ) = 0;

	//
	// Servers hosted in data centers known to the Valve relay network
	//

	/// Returns the value of the SDR_LISTEN_PORT environment variable.  This
	/// is the UDP server your server will be listening on.  This will
	/// configured automatically for you in production environments.
	///
	/// In development, you'll need to set it yourself.  See
	/// https://partner.steamgames.com/doc/api/ISteamNetworkingSockets
	/// for more information on how to configure dev environments.
	virtual uint16 GetHostedDedicatedServerPort() = 0;

	/// Returns 0 if SDR_LISTEN_PORT is not set.  Otherwise, returns the data center the server
	/// is running in.  This will be k_SteamDatagramPOPID_dev in non-production environment.
	virtual SteamNetworkingPOPID GetHostedDedicatedServerPOPID() = 0;

	/// Return info about the hosted server.  This contains the PoPID of the server,
	/// and opaque routing information that can be used by the relays to send traffic
	/// to your server.
	///
	/// You will need to send this information to your backend, and put it in tickets,
	/// so that the relays will know how to forward traffic from
	/// clients to your server.  See SteamDatagramRelayAuthTicket for more info.
	///
	/// Also, note that the routing information is contained in SteamDatagramGameCoordinatorServerLogin,
	/// so if possible, it's preferred to use GetGameCoordinatorServerLogin to send this info
	/// to your game coordinator service, and also login securely at the same time.
	///
	/// On a successful exit, k_EResultOK is returned
	///
	/// Unsuccessful exit:
	/// - Something other than k_EResultOK is returned.
	/// - k_EResultInvalidState: We are not configured to listen for SDR (SDR_LISTEN_SOCKET
	///   is not set.)
	/// - k_EResultPending: we do not (yet) have the authentication information needed.
	///   (See GetAuthenticationStatus.)  If you use environment variables to pre-fetch
	///   the network config, this data should always be available immediately.
	/// - A non-localized diagnostic debug message will be placed in m_data that describes
	///   the cause of the failure.
	///
	/// NOTE: The returned blob is not encrypted.  Send it to your backend, but don't
	///       directly share it with clients.
	virtual EResult GetHostedDedicatedServerAddress( SteamDatagramHostedAddress *pRouting ) = 0;

	/// Create a listen socket on the specified virtual port.  The physical UDP port to use
	/// will be determined by the SDR_LISTEN_PORT environment variable.  If a UDP port is not
	/// configured, this call will fail.
	///
	/// This call MUST be made through the SteamGameServerNetworkingSockets() interface.
	/// 
	/// This function should be used when you are using the ticket generator library
	/// to issue your own tickets.  Clients connecting to the server on this virtual
	/// port will need a ticket, and they must connect using ConnectToHostedDedicatedServer.
	///
	/// If you need to set any initial config options, pass them here.  See
	/// SteamNetworkingConfigValue_t for more about why this is preferable to
	/// setting the options "immediately" after creation.
	virtual HSteamListenSocket CreateHostedDedicatedServerListenSocket( int nLocalVirtualPort, int nOptions, const SteamNetworkingConfigValue_t *pOptions ) = 0;

	/// Generate an authentication blob that can be used to securely login with
	/// your backend, using SteamDatagram_ParseHostedServerLogin.  (See
	/// steamdatagram_gamecoordinator.h)
	///
	/// Before calling the function:
	/// - Populate the app data in pLoginInfo (m_cbAppData and m_appData).  You can leave
	///   all other fields uninitialized.
	/// - *pcbSignedBlob contains the size of the buffer at pBlob.  (It should be
	///   at least k_cbMaxSteamDatagramGameCoordinatorServerLoginSerialized.)
	///
	/// On a successful exit:
	/// - k_EResultOK is returned
	/// - All of the remaining fields of pLoginInfo will be filled out.
	/// - *pcbSignedBlob contains the size of the serialized blob that has been
	///   placed into pBlob.
	///
	/// Unsuccessful exit:
	/// - Something other than k_EResultOK is returned.
	/// - k_EResultNotLoggedOn: you are not logged in (yet)
	/// - See GetHostedDedicatedServerAddress for more potential failure return values.
	/// - A non-localized diagnostic debug message will be placed in pBlob that describes
	///   the cause of the failure.
	///
	/// This works by signing the contents of the SteamDatagramGameCoordinatorServerLogin
	/// with the cert that is issued to this server.  In dev environments, it's OK if you do
	/// not have a cert.  (You will need to enable insecure dev login in SteamDatagram_ParseHostedServerLogin.)
	/// Otherwise, you will need a signed cert.
	///
	/// NOTE: The routing blob returned here is not encrypted.  Send it to your backend
	///       and don't share it directly with clients.
	virtual EResult GetGameCoordinatorServerLogin( SteamDatagramGameCoordinatorServerLogin *pLoginInfo, int *pcbSignedBlob, void *pBlob ) = 0;


	//
	// Relayed connections using custom signaling protocol
	//
	// This is used if you have your own method of sending out-of-band
	// signaling / rendezvous messages through a mutually trusted channel.
	//

	/// Create a P2P "client" connection that does signaling over a custom
	/// rendezvous/signaling channel.
	///
	/// pSignaling points to a new object that you create just for this connection.
	/// It must stay valid until Release() is called.  Once you pass the
	/// object to this function, it assumes ownership.  Release() will be called
	/// from within the function call if the call fails.  Furthermore, until Release()
	/// is called, you should be prepared for methods to be invoked on your
	/// object from any thread!  You need to make sure your object is threadsafe!
	/// Furthermore, you should make sure that dispatching the methods is done
	/// as quickly as possible.
	///
	/// This function will immediately construct a connection in the "connecting"
	/// state.  Soon after (perhaps before this function returns, perhaps in another thread),
	/// the connection will begin sending signaling messages by calling
	/// ISteamNetworkingConnectionSignaling::SendSignal.
	///
	/// When the remote peer accepts the connection (See
	/// ISteamNetworkingSignalingRecvContext::OnConnectRequest),
	/// it will begin sending signaling messages.  When these messages are received,
	/// you can pass them to the connection using ReceivedP2PCustomSignal.
	///
	/// If you know the identity of the peer that you expect to be on the other end,
	/// you can pass their identity to improve debug output or just detect bugs.
	/// If you don't know their identity yet, you can pass NULL, and their
	/// identity will be established in the connection handshake.  
	///
	/// If you use this, you probably want to call ISteamNetworkingUtils::InitRelayNetworkAccess()
	/// when your app initializes
	///
	/// If you need to set any initial config options, pass them here.  See
	/// SteamNetworkingConfigValue_t for more about why this is preferable to
	/// setting the options "immediately" after creation.
	//virtual HSteamNetConnection ConnectP2PCustomSignaling( ISteamNetworkingConnectionCustomSignaling *pSignaling, const SteamNetworkingIdentity *pPeerIdentity, int nRemoteVirtualPort, int nOptions, const SteamNetworkingConfigValue_t *pOptions ) = 0;
	virtual HSteamNetConnection ConnectP2PCustomSignaling( ISteamNetworkingConnectionSignaling *pSignaling, const SteamNetworkingIdentity *pPeerIdentity, int nRemoteVirtualPort, int nOptions, const SteamNetworkingConfigValue_t *pOptions ) = 0;

	/// Called when custom signaling has received a message.  When your
	/// signaling channel receives a message, it should save off whatever
	/// routing information was in the envelope into the context object,
	/// and then pass the payload to this function.
	///
	/// A few different things can happen next, depending on the message:
	///
	/// - If the signal is associated with existing connection, it is dealt
	///   with immediately.  If any replies need to be sent, they will be
	///   dispatched using the ISteamNetworkingConnectionSignaling
	///   associated with the connection.
	/// - If the message represents a connection request (and the request
	///   is not redundant for an existing connection), a new connection
	///   will be created, and ReceivedConnectRequest will be called on your
	///   context object to determine how to proceed.
	/// - Otherwise, the message is for a connection that does not
	///   exist (anymore).  In this case, we *may* call SendRejectionReply
	///   on your context object.
	///
	/// In any case, we will not save off pContext or access it after this
	/// function returns.
	///
	/// Returns true if the message was parsed and dispatched without anything
	/// unusual or suspicious happening.  Returns false if there was some problem
	/// with the message that prevented ordinary handling.  (Debug output will
	/// usually have more information.)
	///
	/// If you expect to be using relayed connections, then you probably want
	/// to call ISteamNetworkingUtils::InitRelayNetworkAccess() when your app initializes
	//virtual bool ReceivedP2PCustomSignal( const void *pMsg, int cbMsg, ISteamNetworkingCustomSignalingRecvContext *pContext ) = 0;
	virtual bool ReceivedP2PCustomSignal( const void *pMsg, int cbMsg, ISteamNetworkingSignalingRecvContext *pContext ) = 0;

	//
	// Certificate provision by the application.  On Steam, we normally handle all this automatically
	// and you will not need to use these advanced functions.
	//

	/// Get blob that describes a certificate request.  You can send this to your game coordinator.
	/// Upon entry, *pcbBlob should contain the size of the buffer.  On successful exit, it will
	/// return the number of bytes that were populated.  You can pass pBlob=NULL to query for the required
	/// size.  (512 bytes is a conservative estimate.)
	///
	/// Pass this blob to your game coordinator and call SteamDatagram_CreateCert.
	virtual bool GetCertificateRequest( int *pcbBlob, void *pBlob, SteamNetworkingErrMsg &errMsg ) = 0;

	/// Set the certificate.  The certificate blob should be the output of
	/// SteamDatagram_CreateCert.
	virtual bool SetCertificate( const void *pCertificate, int cbCertificate, SteamNetworkingErrMsg &errMsg ) = 0;

	/// Reset the identity associated with this instance.
	/// Any open connections are closed.  Any previous certificates, etc are discarded.
	/// You can pass a specific identity that you want to use, or you can pass NULL,
	/// in which case the identity will be invalid until you set it using SetCertificate
	///
	/// NOTE: This function is not actually supported on Steam!  It is included
	///       for use on other platforms where the active user can sign out and
	///       a new user can sign in.
	virtual void ResetIdentity( const SteamNetworkingIdentity *pIdentity ) = 0;

	//
	// Misc
	//

	/// Invoke all callback functions queued for this interface.
	/// See k_ESteamNetworkingConfig_Callback_ConnectionStatusChanged, etc
	///
	/// You don't need to call this if you are using Steam's callback dispatch
	/// mechanism (SteamAPI_RunCallbacks and SteamGameserver_RunCallbacks).
	virtual void RunCallbacks() = 0;

	//
	// "FakeIP" system.
	//
	// A FakeIP is essentially a temporary, arbitrary identifier that
	// happens to be a valid IPv4 address.  The purpose of this system is to make it
	// easy to integrate with existing code that identifies hosts using IPv4 addresses.
	// The FakeIP address will never actually be used to send or receive any packets
	// on the Internet, it is strictly an identifier.
	//
	// FakeIP addresses are designed to (hopefully) pass through existing code as
	// transparently as possible, while conflicting with "real" addresses that might
	// be in use on networks (both the Internet and LANs) in the same code as little
	// as possible.  At the time this comment is being written, they come from the
	// 169.254.0.0/16 range, and the port number will always be >1024.  HOWEVER,
	// this is subject to change!  Do not make assumptions about these addresses,
	// or your code might break in the future.  In particular, you should use
	// functions such as  ISteamNetworkingUtils::IsFakeIP to determine if an IP
	// address is a "fake" one used by this system.
	//

	/// Begin asynchronous process of allocating a fake IPv4 address that other
	/// peers can use to contact us via P2P.  IP addresses returned by this
	/// function are globally unique for a given appid.
	///
	/// nNumPorts is the numbers of ports you wish to reserve.  This is useful
	/// for the same reason that listening on multiple UDP ports is useful for
	/// different types of traffic.  Because these allocations come from a global
	/// namespace, there is a relatively strict limit on the maximum number of
	/// ports you may request.  (At the time of this writing, the limit is 4.)
	/// The port assignments are *not* guaranteed to have any particular order
	/// or relationship!  Do *not* assume they are contiguous, even though that
	/// may often occur in practice.
	///
	/// Returns false if a request was already in progress, true if a new request
	/// was started.  A SteamNetworkingFakeIPResult_t will be posted when the request
	/// completes.
	///
	/// For gameservers, you *must* call this after initializing the SDK but before
	/// beginning login.  Steam needs to know in advance that FakeIP will be used.
	/// Everywhere your public IP would normally appear (such as the server browser) will be
	/// replaced by the FakeIP, and the fake port at index 0.  The request is actually queued
	/// until the logon completes, so you must not wait until the allocation completes
	/// before logging in.  Except for trivial failures that can be detected locally
	/// (e.g. invalid parameter), a SteamNetworkingFakeIPResult_t callback (whether success or
	/// failure) will not be posted until after we have logged in.  Furthermore, it is assumed
	/// that FakeIP allocation is essential for your application to function, and so failure
	/// will not be reported until *several* retries have been attempted.  This process may
	/// last several minutes.  It is *highly* recommended to treat failure as fatal.
	///
	/// To communicate using a connection-oriented (TCP-style) API:
	/// - Server creates a listen socket using CreateListenSocketP2PFakeIP
	/// - Client connects using ConnectByIPAddress, passing in the FakeIP address.
	/// - The connection will behave mostly like a P2P connection.  The identities
	///   that appear in SteamNetConnectionInfo_t will be the FakeIP identity until
	///   we know the real identity.  Then it will be the real identity.  If the
	///   SteamNetConnectionInfo_t::m_addrRemote is valid, it will be a real IPv4
	///   address of a NAT-punched connection.  Otherwise, it will not be valid.
	/// 
	/// To communicate using an ad-hoc sendto/recv from (UDP-style) API,
	/// use CreateFakeUDPPort.
	virtual bool BeginAsyncRequestFakeIP( int nNumPorts ) = 0;

	/// Return info about the FakeIP and port(s) that we have been assigned,
	/// if any.  idxFirstPort is currently reserved and must be zero.
	/// Make sure and check SteamNetworkingFakeIPResult_t::m_eResult
	virtual void GetFakeIP( int idxFirstPort, SteamNetworkingFakeIPResult_t *pInfo ) = 0;

	/// Create a listen socket that will listen for P2P connections sent
	/// to our FakeIP.  A peer can initiate connections to this listen
	/// socket by calling ConnectByIPAddress.
	///
	/// idxFakePort refers to the *index* of the fake port requested,
	/// not the actual port number.  For example, pass 0 to refer to the
	/// first port in the reservation.  You must call this only after calling
	/// BeginAsyncRequestFakeIP.  However, you do not need to wait for the
	/// request to complete before creating the listen socket.
	virtual HSteamListenSocket CreateListenSocketP2PFakeIP( int idxFakePort, int nOptions, const SteamNetworkingConfigValue_t *pOptions ) = 0;

	/// If the connection was initiated using the "FakeIP" system, then we
	/// we can get an IP address for the remote host.  If the remote host had
	/// a global FakeIP at the time the connection was established, this
	/// function will return that global IP.  Otherwise, a FakeIP that is
	/// unique locally will be allocated from the local FakeIP address space,
	/// and that will be returned.
	/// 
	/// The allocation of local FakeIPs attempts to assign addresses in
	/// a consistent manner.  If multiple connections are made to the
	/// same remote host, they *probably* will return the same FakeIP.
	/// However, since the namespace is limited, this cannot be guaranteed.
	///
	/// On failure, returns:
	/// - k_EResultInvalidParam: invalid connection handle
	/// - k_EResultIPNotFound: This connection wasn't made using FakeIP system
	virtual EResult GetRemoteFakeIPForConnection( HSteamNetConnection hConn, SteamNetworkingIPAddr *pOutAddr ) = 0;

	/// Get an interface that can be used like a UDP port to send/receive
	/// datagrams to a FakeIP address.  This is intended to make it easy
	/// to port existing UDP-based code to take advantage of SDR.
	/// 
	/// idxFakeServerPort refers to the *index* of the port allocated using
	/// BeginAsyncRequestFakeIP and is used to create "server" ports.  You may
	/// call this before the allocation has completed.  However, any attempts
	/// to send packets will fail until the allocation has succeeded.  When
	/// the peer receives packets sent from this interface, the from address
	/// of the packet will be the globally-unique FakeIP.  If you call this
	/// function multiple times and pass the same (nonnegative) fake port index,
	/// the same object will be returned, and this object is not reference counted.
	/// 
	/// To create a "client" port (e.g. the equivalent of an ephemeral UDP port)
	/// pass -1.  In this case, a distinct object will be returned for each call.
	/// When the peer receives packets sent from this interface, the peer will
	/// assign a FakeIP from its own locally-controlled namespace.
	virtual ISteamNetworkingFakeUDPPort *CreateFakeUDPPort( int idxFakeServerPort ) = 0;

protected:
//	~ISteamNetworkingSockets(); // Silence some warnings
};

#endif // ISTEAMNETWORKINGSOCKETS010